Recycling Systems Australia - Tub Grinders, Chippers, Wood Hogs, Conveyors, Ship & Barge Loaders

FEATURES

• Slow speed, high torque, primary waste reduction Predator shredder offers the convenience of a self loading machine while reducing the capital costs associated with operating two pieces of equipment.
• Better control over positioning material into the rotors, production is optimized.
• Can produce up to 30 tonnes per hour, depending on the material.
• Loader hydraulics are powered with an auxiliary motor, ensuring the horsepower from the main engine is dedicated to the rotors.
• Predator with loader is built standard on a fifth wheel frame with a tri-axle design.
• This machine is equiped with the unique Iqan system which automatically adjusts speeds, pressures and rotor direction to optimize production and engine efficiency.
• A 64" x 76" shredder opening feeds material to 15" diameter counter meshing rotors with hooked star shredders mounted to the rotor in a spiral pattern.

GENERAL

Stationary or Telsescoping Cab
Length (transport)  .....................................................39’ 9"   
Length (operating) .....................................................60’ 8" 
Height (transport) ......................................................13' 6" 
Height (operating) ......................................................17' 4" 
Width .......................................................................10' 2" 
Weight  ....................................................................75, 820 lbs  
Rotating Cab
Length (transpot)  .....................................................40' 11" 
Length (operating) ....................................................61’ 10" 
Height (transport) .....................................................13' 6" 
Height (operating) .....................................................17' 4" 
Width .......................................................................8' 8" 
Weight  ....................................................................76, 020 lbs  
Engine  .....................................................................Cat C-13, Cat 3054 
Horsepower ...............................................................(Cat C-13) 440HP, (Cat 3054) 115HP 
Fuel Capacity (tank) ..................................................225 gallons 
Hydraulic oil capacity  .................................................215 gallons 
Shredder opening  ....................................................64" x 76" 
Shaft speed ............................................................17 - 27 RPM 

Cab and Loader

• Enclosed, weatherised operator's cab with air conditioner / heater and 6 way adjustable seat, complete with all controls.
• Morlift model 350 knuckleboom loader with 24' 6" extended reach and 280 degree continuous swing, 30" or 36" Tarantula grapple with 360 degree turn.
• Lift capacity 8,300 lbs at 10'
• Telescoping cab extends 22" hydraulically.

Each hooked star has a double edged tooth staggered across the star for 100% coverage for grabbing and ripping in both directions.	Two 149:1 reduction transmissions produce 950,000 inch pounds of torque to each rotor.	Enclosed weatherized operators cab avaiable as stationary, rotating or telescoping.	Engine gauge panel and emergency shut down system are located in an anti theft console.

Feed Hopper

• 75" x 95" fixed section
• 95" x 113" pivoting section which raises hydraulically to a 45 degree angle.

Rotors

• 2 counter meshing shredder assemblies
• 63 1/2" long, 33" tip diameter, each with seven cutting rotors with five tips. 

Drive System

• 2 independent electronically controlled, hydraulically driven auto reversing 149:1 reducing transmissions provide 950,000 inch pounds of torque to each rotor.

Discharge System

• 54" dual belt conveyor with a stacking height of 17'4", hydraulically folds for transport.
• Cross belt magnet ferrous metal removal. 

Options

• 5 or 11 HP compressor
• Magnetic end pulley for stacking conveyor.